Manual de utilizare Casio EFA119BK-1A

Casio EFA119BK-1A
8 · 2
PDF manual
 · 4 pagini
Engleză
manualCasio EFA119BK-1A

Operation Guide 4334

1
MO0607-EB
Warning!
The measurement functions built into this watch are not intended for use in taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonably accurate representations only.
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
claims by third parties that may arise through the use of this watch.

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
Button operations are indicated using the letters shown
in the illustration.
For the sake of simplicity, the sample displays in this
manual do not show the analog hands of the watch.
Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)

General Guide

Press C to change from mode to mode.
In any mode, press L to illuminate the display.
Recall Mode
World Time Mode
Stopwatch Modes
Countdown Timer
Mode
Alarm Mode
Press C.
Hand Setting Mode
TimeKeeping Mode
This watch has two
stopwatch modes. See
“Stopwatches” for more
information.

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date.
This watch features separate digital and analog
timekeeping. The procedures for setting the digital time
and analog time are different.
See “Thermometer” for details about the thermometer.
Setting the Digital Time and Date
This watch is preset with UTC differential values that
represent each time zone around the globe. Before setting
the digital time, be sure to first set the UTC differential for
your Home Time, which is the location where you normally
will be using the watch.
Note that World Time mode times are all displayed
based on the time and date settings you configure in the
Timekeeping Mode.
PM indicator
Hour : Minutes
Seconds
Month – Day
Thermometer
Day of week
To set the digital time and date
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
Be sure to configure the correct UTC differential for
your Home Time before configuring any other
Timekeeping Mode settings.
See the “UTC Differential/City Code List” for
information about the UTC differential settings that are
supported.
2.Press C to move the flashing in the sequence shown
below to select other settings.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Seconds
Hour
UTC

Differential

Minutes

Year

DST
Day

Month

Seconds

Temperature

Unit

12/24-Hour

Format

Temperature Sensor

Calibration

Screen: To do this:
Reset the seconds to 00
Toggle between Daylight Saving
Time (ON) and Standard Time (OF)
Specify the UTC differential
Change the hour or minutes
Toggle between 12-hour (12H) and
24-hour (24H) timekeeping
Do this:
Press D.
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
Press D.
Use D (+) and B (–).
Change the year
Change the month or day
3. When the setting you want to change is flashing, use D and B to change it as
described below.
The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.
For information about settings other than the time and date, see the following.
Temperature Sensor Calibration: “Thermometer”
Temperature Unit: “Thermometer”
4. Press A to exit the setting screen.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in 0.5-
hour units.
Any time the seconds setting is changed, the analog hands are adjusted accordingly.
See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OF displayed).
4. Press A to exit the setting screen.
The DST indicator appears on the Timekeeping, Alarm,
and Hand Setting Mode screens to indicate that
Daylight Saving Time is turned on.
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l

DST indicator

On/Off status

To adjust the analog time
1.In the Timekeeping Mode, press C six times to enter
the Hand Setting Mode.
2.Hold down A until the current digital time starts to
flash, which indicates the setting screen.
3. Use D to adjust the analog setting.
Press D once to advance the hands 20 seconds.
Hold down D to advance the hands at high speed.
To lock high speed hands movement, hold down D to start it and then press B
to lock. The hands will continue to advance for one 12-hour cycle or until you
press any button to stop it.
High-speed hand movement also will stop automatically after the time advances
12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper)
starts to sound.
4. Press A to exit the setting screen.
The minute hand will be adjusted slightly to match the seconds when you exit the
setting screen.
To return to the Timekeeping Mode, press C.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Stopwatches
Your watch has two stopwatch modes: a Single Stopwatch
Mode and a Dual Stopwatch Mode. Both stopwatch
modes measure times in 1/100-second units for the first
hour, and in 1-second units after that. In both stopwatch
modes, timing is possible up to 99 hours, 59 minutes,
59.99 seconds.
The Single Stopwatch Mode (ST1) displays the total
elapsed time and lap times for a single vehicle or runner.
The Dual Stopwatch Mode (ST2) can be used to measure
elapsed time for two vehicles or runners at the same time,
including separate lap times and the time differential
between vehicles or runners.
The data produced by either stopwatch mode is stored
automatically in watch memory, for later recall when you
need it.
When the elapsed time being kept by either of the stopwatches exceeds 99 hours,
59 minutes, 59.99 seconds, the displayed time returns to all zeros and time
measurement continues from there. Elapsed time measurement continues until you
reset it to all zeros.
All of the operations in this section are performed in the stopwatch modes, which
you enter by pressing C.

Manual

Consultați aici manualul pentru Casio EFA119BK-1A, gratuit. Acest manual se încadrează în categoria Ceasuri și a fost evaluat de 2 persoane cu o notă medie de 8. Acest manual este disponibil în următoarele limbi: Engleză. Aveți o întrebare despre Casio EFA119BK-1A sau aveți nevoie de ajutor? Puneți întrebarea aici

Aveți nevoie de ajutor?

Aveți o întrebare despre Casio EFA119BK-1A și răspunsul nu se află în manual? Puneți întrebarea aici. Furnizați o descriere clară și cuprinzătoare a problemei și a întrebării dvs. Cu cât problema și întrebarea dvs. sunt descrise mai bine, cu atât le va fi mai ușor celorlalți proprietari Casio EFA119BK-1A să vă ofere un răspuns bun.

Numărul de întrebări: 0

Specificații Casio EFA119BK-1A

Mai jos veți găsi specificațiile produsului și specificațiile manuale ale Casio EFA119BK-1A.

General
Brand Casio
Model EFA119BK-1A
Produs ceas
EAN 79767852115, 0797678521158
Limbă Engleză
Tipul fișierului Manual de utilizare (PDF)
Detalii tehnice
Tipul de mecanism -
Tip cadran ceas Cadran analog
Impermeabil Da
Rezistent la apă până la adâncime de 100 m
Dovada de şoc -
Cronograf -
Funcție timp pe mapamond Da
Funcție alarmă Da
Calendar Da
Retroiluminare LED Da
Precizie 30 sec/lună
Termometrul Da
Tip ceas Ceas brățară
Design
Material carcasă ceas -
Culoare carcasă externă Din oţel inoxidabil
Material bandă Din oţel inoxidabil
Culoare principală curea Din oţel inoxidabil
Tip sticlă ceas -
Formă carcasă Rotunde
Culoare principală cadran ceas Negru
Stil indicator ceas Fără numere
Design produs De lux
Tipul de gen Bărbat
Managementul energiei
Tip baterie SR927W
Durata bateriei 2 An(i)
Număr de baterii acceptate 2
Afișați mai multe

Întrebări frecvente

Nu puteți găsi răspunsul la întrebarea dvs. în manual? Puteți găsi răspunsul la întrebarea dvs. în Întrebările frecvente despre Casio EFA119BK-1A de mai jos.

Întrebarea dvs. nu se regăsește aici? Puneți întrebarea aici

Fără rezultate