Name: Casio PRG-40B-2VER
Brand: Casio
SKU: 243250
Rating: 64 (1 reviews)

2271-1

Module No. 2271

GETTING ACQUAINTED

Congratulations upon your selection of this CASIO watch. To get the most out

of your purchase, be sure to carefully read this manual and keep it on hand

for later reference when necessary.

Applications

The built-in sensors of this watch measure direction, altitude, barometric

pressure, and temperature. Measured values are then shown on the display.

Such features make this watch useful when hiking, mountain climbing, or

when engaging in other such outdoor activities.

Warning!

• The measurement functions built into this watch are not intended for

taking measurements that require professional or industrial precision.

Values produced by this watch should be considered as reasonable

representations only.

• When engaging in mountain climbing or other activities in which losing

your way can create a dangerous or life-threatening situation, always

be sure to use a second compass to confirm direction readings.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,

or any claims by third parties that may arise through the use of this

watch.

(Light)

About This Manual

• Button operations are indicated using the

letters shown in the illustration.

• Each section of this manual provides you

with the information you need to perform

operations in each mode. Further details

and technical information can be found in

the “REFERENCE” section.

GENERAL GUIDE

• If the digital display of your watch is continuously changing, see

“Auto Display Function” for information on how to stop it.

• The illustration below shows which buttons you need to press to navigate

between modes.

• In any mode, hold down D for about one second to return to the

Timekeeping Mode.

• You can use buttons B, C, and E to directly enter a sensor mode from

the Timekeeping Mode or from another sensor mode. To get to a sensor

mode from the Recall, Alarm, or Stopwatch Mode, you must go to the

Timekeeping Mode first.

Press D.

Recall Mode

Stopwatch Mode

Alarm Mode

Sensor Modes

Altimeter Mode

Digital Compass Mode

Barometer/

Thermometer Mode

Timekeeping Mode

▲

Press B.

TIMEKEEPING

Use the Timekeeping Mode to set and view

the current time and date.

To reset the seconds count to zero

1. In the Timekeeping Mode, hold down A

until the second digits start to flash, which

indicates the setting screen.

2. Press E to reset the seconds count to

00.

• Pressing E while the seconds count is

in the range of 30 to 59 resets the

seconds to

00 and adds 1 to the

minutes. In the range of 00 to 29, the

minutes count is unchanged.

3. Press A to exit the setting screen.

Hour : Minutes

PM indicator

Seconds

Month – Day

Day of week

Year

To set the time and date

1. In the Timekeeping Mode, hold down A

until the second digits start to flash, which

indicates the setting screen.

2. Press D to move the flashing in the

sequence shown below to select other

settings.

Seconds

Hour

Minutes

Day

Month Year

12/24-Hour

Format

3. While a setting is flashing, use E (+) and B (–) to change it.

• When the 12/24-hour setting is selected, press E or B to toggle

between 12-hour (

12H) and 24-hour (24H) timekeeping.

4. Press A to exit the setting screen.

Aveți nevoie de ajutor?

Numărul de întrebări: 0

Aveți o întrebare despre Casio PRG-40B-2VER sau aveți nevoie de ajutor? Puneți-vă întrebarea aici. Oferiți o descriere clară și cuprinzătoare a problemei și a întrebării dvs.. Cu cât oferiți mai multe detalii pentru problema și întrebarea dvs., cu atât va fi mai ușor pentru ceilalți proprietari Casio PRG-40B-2VER să răspundă corect la întrebarea dvs..

Despre Casio PRG-40B-2VER

Consultați aici manualul pentru Casio PRG-40B-2VER, gratuit. Acest manual se încadrează în categoria Ceasuri sportive și a fost evaluat de 1 persoane cu o notă medie de 6.4. Acest manual este disponibil în următoarele limbi: Engleză. Aveți o întrebare despre Casio PRG-40B-2VER sau aveți nevoie de ajutor? Puneți întrebarea aici