Name: Freestyle Predator
Brand: Freestyle
SKU: 204776
Rating: 99 (1 reviews)

manualFreestyle Predator

ENGLISH

SHARK PREDATOR

S1S4

S2S3

S1. Start/stop Button

S2. Lap/reset Button

S3. Mode Button

S4. Light Button

S5. Lap/reset Button

DISPLAY MODES:

The watch has seven display modes:

HOME TIME, FOREIGN TIME (T2),

ALARM 1 (AL1), ALARM2 (AL2),

CHRONOGRAPH (CHR), PACER and

TIMER (TMR).

To change from one display mode to

another, press S3 button once.

NOTE: In any setting mode, if there is

no manipulation for around 2 minutes,

the watch will automatically save

the entered data and exit the setting

procedure.

TO SET THE TIME AND CALENDAR:

1. Press S3 button to select HOME

TIME mode.

2. Press and hold S2 button for

around 3 seconds, the second digits

will blink.

3. Press S1 button to reset the second

digits to 00. This will increase the

time by 1 minute of the original

setting is at 30 to 59 seconds.

4. Press S3 button, the minute digits

will blink.

5. Press S1 button to set the minute

digits. Holding down the button will

speed up the process.

6. Press S3 button, the hour digits will

blink.

7. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

8. Follow the same pattern to set day

(of the week), year, month and date.

9. After nished making all the set-

tings, press S2 button to conrm.

NOTE: The year can be set within the

range of 2000 to 2099.

TO SET THE FOREIGN TIME:

1. Press S3 button to select FOREIGN

TIME mode.

2. Press and hold S2 button for

around 3 second. The hour digits

will blink.

3. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

4. After nished making all the set-

tings, press S2 button to conrm.

NOTE: In FOREIGN TIME settings,

only hour digits are open to setting.

The minutes and seconds counts are

synchronized between HOME TIME and

FOREIGN TIME mode.

TO SET THE HOUR FORMAT:

In HOME TIME mode, press S2 button

to toggle between 12-hour and 24-hour

format. The A.M. and P.M. indicators

will be displayed in 12-hour format.

NOTE: The chosen hour format will

apply to both HOME TIME mode and

FOREIGN TIME mode.

TO TURN ON/OFF THE HOURLY

CHIME:

In HOME TIME mode,

1. Press S1 button to activate or

deactivate the hourly chime func-

tion.

2. When the hourly chime function is

activated, the hourly chime indica-

tor

will appear.

TO SET THE DAILY ALARMS:

1. Press S3 button to select ALARM1

or ALARM2 mode to set.

2. Press and hold S2 button for around

3 seconds, the minute digits will

blink.

3. Press S1 button to set the minute

digits. Holding down the button will

speed up the process.

4. Press S3 button, the hour digits will

blink.

5. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

6. After nished making all the set-

tings, press S2 button to conrm.

TO TURN ON/OFF THE DAILY ALARMS:

In ALARM1 or ALARM2 mode,

1. Press S1 button to activate or

deactivate the alarm function.

2. While the alarm function is

activated, the alarm indicator

/ will appear.

WHEN AN ALARM GOES OFF:

An alarm tune will be emitted at the

designated time when the alarm is

activated. To stop the tune, press any

button.

TO USE THE CHRONOGRAPH:

Press S3 button to select CHRONO-

GRAPH mode.

1. The chronograph will then be

displayed in its current state –

reset, running, or stopped.

2. To resume a counting, press S1

button to resume from where it left

off.

3. To start a new counting, reset the

stop watch to zero rst.

4. Press S1 button to stop count-

ing, then press S2 button to reset

the counter to zero.

For the measurement of elapsed time:

In CHRONOGRAPH mode,

1. Press S1 button to start counting.

To stop counting, press S1 button.

2. Press S1 button again to resume

from where it left off.

3. To reset to zero, press S1 button to

stop counting and then press S2

button.

For the measurement of split time:

In CHRONOGRAPH mode,

1. Press S1 button to start counting.

2. While the chronograph is running,

press S2/S5 button to register a lap.

The chronograph is still running in

the background.

After around 8 seconds, the

currently accumulated time will be

displayed.

3. Repeat the last step until all the

laps have been registered.

4. To stop counting, press S1 button.

Press S1 button again to resume

from where it left off.

5. To reset to zero, press S1 button to

stop counting, then press S2 button

to reset the counter to zero.

NOTE: The chronograph can record

up to a maximum of 10 laps. If you try

to record more than 10 laps, the lap

number will show a ashing “F” and

the extra laps will not be recorded.

NOTE: You can leave the chronograph

running while switching over to other

operating modes.

NOTE: The chronograph will count up

to 9 hours, 59 minutes and 59.99 sec-

onds before starting from zero again.

TO USE THE RECALL FUNCTION:

1. Press S3 button to select RECALL

mode.

2. Press S1 button to scroll through

the recorded individual lap and split

time.

NOTE: The recall function is available

only when there is lap record stored.

NOTE: The previous set of lap record

will automatically be replaced by the

next set of lap record.

TO USE THE PACER:

1. Press S3 button to select PACER

mode.

2. The pacer frequency will be dis

played above the home time.

3. Press S2 button to cycle among the

pre-set values 40, 45, 50, 55, 60, 65,

70, 75, 80, 85, 90, 95, 100, 110,

120, 130, 140, 150 and 160 beeps

per minute.

4. After nished making all the

settings, press S1 button to start

the pacer.

5. To stop the pacer, press S1 button

again.

TO SET THE TIMER:

1. Press S3 button to select TIMER

mode.

2. Press and hold S2 button, the

second digits will blink.

3. Press S1 button to set the second

digits. Holding down the button will

speed up the process.

4. Press S3 button, the minute digits

will blink.

5. Press S1 button to set the minute

digits. Holding down the button will

speed up the process.

6. Press S3 button, the hour digits will

blink.

7. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

8. After nished making all the set-

tings, press S2 button to conrm.

NOTE: The timer can be set up to a

maximum of 9 hours, 59 minutes and

59 seconds.

TO USE THE TIMER:

1. Press S3 button to select TIMER

mode.

2. The timer will be displayed in its

current state – reset, running, or

stopped.

3. To resume a counting, press S1

button to resume from where it left

off.

4. To start a new counting, reload the

timer rst.

Press S1 button to stop counting

Consultați aici manualul pentru Freestyle Predator, gratuit. Acest manual se încadrează în categoria ceasuri și a fost evaluat de 1 persoane cu o notă medie de 9.9. Acest manual este disponibil în următoarele limbi: Spaniolă, Engleză. Aveți o întrebare despre Freestyle Predator sau aveți nevoie de ajutor? Puneți întrebarea aici

Aveți nevoie de ajutor?

Aveți o întrebare despre Freestyle și răspunsul nu se află în manual? Puneți întrebarea aici. Furnizați o descriere clară și cuprinzătoare a problemei și a întrebării dvs. Cu cât problema și întrebarea dvs. sunt descrise mai bine, cu atât le va fi mai ușor celorlalți proprietari Freestyle să vă ofere un răspuns bun.

Numărul de întrebări: 0

General

	Freestyle
	Predator \| FS84998
	ceas
	38461005654, 38461005692, 0038461005692
	Spaniolă, Engleză
	Manual de utilizare (PDF)

Detalii tehnice

Tipul de mecanism	Electronice
Cronograf	Da
Tip cadran ceas	Cadral LCD
Impermeabil	Da
Rezistent la apă până la adâncime de	100 m
Dovada de şoc	-
Cronometrul	Da
Funcție alarmă	Da
Calendar	Da
Retroiluminare LED	Da
Cronometru	Da
Tip ceas	Ceas pentru încheietură

Design

Material carcasă ceas	-
Culoare carcasă externă	Negru
Material bandă	Poliuretan
Culoare principală curea	Negru
Tip sticlă ceas	-
Formă carcasă	Rotunde
Culoare principală cadran ceas	Negru/Gri
Stil indicator ceas	Cifre arabe
Design produs	Sport

Afișați mai multe

Nu puteți găsi răspunsul la întrebarea dvs. în manual? Puteți găsi răspunsul la întrebarea dvs. în Întrebările frecvente despre Freestyle Predator de mai jos.

O baterie în ceas meu a început să se corodeze. Dispozitivul poate fi încă folosit în siguranță?

Produsul poate fi încă utilizat în condiții de siguranță după o curățare adecvată. Scoateți bateria folosind mănuși și curățați compartimentul bateriei cu o periuță de dinți și oțet. După uscare, bateriile noi pot fi introduse în dispozitiv.