Oyen Digital Hard-diskuri externe ·
Oyen Digital manuale

Manual de utilizare Oyen Digital EN3-54-1000-M

Oyen Digital EN3-54-1000-M
9 · 1
PDF manual  · 1 pagină
Engleză
manualOyen Digital EN3-54-1000-M

MiniPro Hard Drive Series

User Guide

(3) Connecting the Hard Drive

Connecting using USB:

1) Connect the USB connector from the USB cable to a USB port on
your computer. (If your drive includes a USB y-cable, we recommend
connecting both USB connectors for maximum power. This is generally
not necessary if connecting to a USB 3.0 integrated port.)
2) Connect the other end of the USB cable to the hard drive.
3) Turn the power switch on. Wait 5-20 seconds for the computer
to recognize the drive.
Notes:
a) Front USB ports on a desktop may not be able to provide adequate power.
b) If connecting to a USB Hub, make sure it is a powered hub (uses AC adapter).

Connecting using FireWire:

1) Connect the appropriate FireWire cable to a FireWire port on
your computer.
2) Connect the other end of the FireWire cable to the hard drive.
3) Turn the power switch on. Wait 5-20 seconds for the computer
to recognize the drive.

Connecting using eSATA:

1) Connect the eSATA cable to the eSATA port on your computer.
2) Connect the other end of the cable to the hard drive.
3) Connect power to the drive using one of the following options:
• AC Power Adapter
• DC to USB Power Cable
• eSATAp Power Cable (not included)
4) Turn the power switch on. Wait 5-20 seconds for the computer
to recognize the drive.
Note: The drive should only be connected to your computer via
one interface at a time.
The drive is pre-formatted as either NTFS (Win) or Mac OS
Extended (Mac) depending on the software included.
For users who wish to reformat the drive, please visit our
website for instructions.
To reformat using Windows:
http://oyendigital.com/FAQs.html#10
To reformat using MAC OS:
http://oyendigital.com/FAQs.html#8
Note: The drive can be used on both Windows and Mac
systems by formatting the drive as “MS-DOS (FAT32).”
Instructions are provided in the Mac OS link above.

(4) Formatting the Hard Drive (5) Using the Hard Drive (6) Disconnecting the Hard Drive

(7) Warranty Information

(9) FAQs

(8) Safety Information

Using the MiniPro with the included software
The MiniPro includes software (via download) that allows you to
easily backup your important les. The software is not required in
order to use the drive. To install the software, simply follow the
steps on the included glossy card.
Using the MiniPro without software
1) Look for the MiniPro drive in My Computer (Win) or Finder (Mac).
2) Click and hold down the mouse button on the le/folder that you
want to copy to the MiniPro drive.
3) Drag the mouse over the icon representing the MiniPro drive.
4) Let go of the mouse button and the le will copy to the MiniPro.
5) The task is complete. This is known as a "drag-and-drop" action.
Using the MiniPro with Apple Time Machine (Mac Users Only)
1) Make sure the drive is formatted as Mac OS Extended (Journaled)
as described in the “Formatting the Hard Drive” section.
2) Go to the Apple Menu > System Preferences and click on the
Time Machine icon. The Time Machine panel will then launch.
3) Click On to enable Time Machine.
4) Select the MiniPro hard drive and choose “Use for Backup.”
5) You can set additional options by clicking the Options button.
6) Time Machine is now backing up your Mac automatically to the
MiniPro hard drive.
.
The disk drive contained in your MiniPro is a delicate
electronic device and is susceptible to damage due to
excessive physical shock. Please handle the unit with care.
Avoid moving the drive while it is reading/writing data.
Doing so can cause corruption and/or damage to the drive.
Q: Can I use my drive with bus power only?
A: Yes, in the majority of cases bus power is adequate. However, if you
are using the drive with a hub, make sure that it is a powered hub
(uses AC adapter).
Q: Why does my computer show that the external hard drive
has less capacity than advertised?
A: In the hard drive industry the partitioned size will be less than the
printed capacity on the label. This is due to the fact that computers
calculate capacity based on a binary (base 2) method, where
1GB = 1024 MB. The hard drive industry calculates using a decimal
method, where 1GB = 1000 MB. This is why the two dierent industries
will report dierent capacities for the same drive.
Q: How do I boot in MAC OS X using the external hard drive?
A: Open Disk Utility, click the drive and select “Partition” in menu on
the right. Choose “Mac OS Extended (Journaled).” 2) Click “Options”.
If you have an Intel Mac, select “GUID” as the partition scheme. If you
have a Power PC Mac, select “Apple Partition Map.” 3) Click “Partition” ;
upon completion, install the Operating System on the external drive.
5) Upon completion, eject the external drive and reboot the Mac as
normal. 6) After reboot, connect the external drive to the computer.
Open System Preferences and click “Startup Disk.” Choose the external
drive. Conrm and click restart.
For other questions please contact tech support or visit the FAQ
section of our Web site (www.oyendigital.com/support.html).
Technical Support: tech@oyendigital.com
This product includes a three (3) year repair/replacement
warranty provided by Oyen Digital. This warranty is non-
transferable and is limited to the original purchaser. Warranty
service may be requested by completing the form at the
following link: www.oyendigital.com/rma-request-form.html
For our complete warranty policy, visit:
www.oyendigital.com/warranty.html
Windows: Close all windows and applications that are accessing
the drive. Click the green “Eject Hardware” (Safely Remove
Hardware) icon in the system tray and highlight the external drive.
Wait for a few seconds until the system prompts “You may safely
remove this device.”
MAC: Close all windows and applications that are accessing the
drive. Drag the external drive to the Trash/Eject icon to dismount it.
After the disk icon has disappeared from the desktop, you may
safely disconnect the external hard drive.
/8
/8
/8
/8
4.9 x 3.1 x 1.0 inches
6Gbps

Manual

Consultați aici manualul pentru Oyen Digital EN3-54-1000-M, gratuit. Acest manual se încadrează în categoria Hard-diskuri externe și a fost evaluat de 1 persoane cu o notă medie de 9. Acest manual este disponibil în următoarele limbi: Engleză. Aveți o întrebare despre Oyen Digital EN3-54-1000-M sau aveți nevoie de ajutor? Puneți întrebarea aici

Aveți nevoie de ajutor?

Aveți o întrebare despre Oyen Digital și răspunsul nu se află în manual? Puneți întrebarea aici. Furnizați o descriere clară și cuprinzătoare a problemei și a întrebării dvs. Cu cât problema și întrebarea dvs. sunt descrise mai bine, cu atât le va fi mai ușor celorlalți proprietari Samsung Galaxy A7 să vă ofere un răspuns bun.

Numărul de întrebări: 0

Oyen Digital EN3-54-1000-M #1
Oyen Digital EN3-54-1000-M #2
Oyen Digital EN3-54-1000-M #3
Oyen Digital EN3-54-1000-M #4
Oyen Digital EN3-54-1000-M #5
Oyen Digital EN3-54-1000-M #6
+1

Specificații Oyen Digital EN3-54-1000-M

Mai jos veți găsi specificațiile produsului și specificațiile manuale ale Oyen Digital EN3-54-1000-M.

General
Brand Oyen Digital
Model EN3-54-1000-M
Produs Hard-disk
EAN 13964075038, 0013964075038
Limbă Engleză
Tipul fișierului PDF
Unitate de disc
Capacitatea hard-discului 1000 Giga Bites
Viteza de rotaţie a HDD 7200 RPM
Capacitate hard disk - "
Mărime memorie temporară HDD 32 Mega bites
Tipul HDD
Alte caracteristici
Tehnologia de conectare Prin cablu
Porturi de intrare/ieşire 1x eSATA, 1x USB3.0, DC In
Caracteristici
Priza si Pornire Da
Sisteme de operare Windows suportate Windows 7 Home Premium,Windows 8,Windows Vista Home Premium,Windows XP Home
Sisteme de operare Mac suportate Mac OS X 10.2 Jaguar,Mac OS X 10.3 Panther,Mac OS X 10.4 Tiger,Mac OS X 10.5 Leopard,Mac OS X 10.6 Snow Leopard,Mac OS X 10.7 Lion,Mac OS X 10.8 Mountain Lion,Mac OS X 10.9 Mavericks
Sisteme de operare Linux suportate Da
Cititor de amprente Nu
Protecție parolă -
Culoarea produsului Negru
Material carcasă Aluminiu
Comutator pornit / oprit Da
Certificare CE, FCC
Conexiune
Versiune USB 3.2 Gen 1 (3.1 Gen 1)
Rată maximă transfer de date 5000 Mbit/s
Rate de transfer de date USB 5000 Mbit/s
Rate de transfer de date eSATA 6 Gbit/s
eSATA Da
Conector USB USB Tip-A
Managementul energiei
Alimentare magistrală bus USB
Voltajul de intrare pentru adaptorul AC 100-240 V
Adaptor extern de curent Da
Frecvenţa adaptorului AC 50 - 60 Hz
Greutate şi dimensiuni
Lățime 124.5 milimetri
Adâncime 79 milimetri
Înălţime 25.4 milimetri
Greutate 296 g
Datele de ambalare
Cabluri incluse eSATA,USB
Ghid utilizator Da
Conditii de mediu
Interval de temperatură de funcţionare (T-T) 5 - 40 °C
Temperatură de depozitare (T-T) -20 - 70 °C
Interval relativ operaţional de umiditate 10 - 80 %
Umiditate relativă la depozitare (H-H) 5 - 90 %
Afișați mai multe

Întrebări frecvente

Nu puteți găsi răspunsul la întrebarea dvs. în manual? Puteți găsi răspunsul la întrebarea dvs. în Întrebările frecvente despre Oyen Digital EN3-54-1000-M de mai jos.

Întrebarea dvs. nu se regăsește aici? Puneți întrebarea aici

Fără rezultate

Manuale de produse conexe

Western Digital WD Elements
manual 66 pagini
Western Digital My Passport
manual 78 pagini
Western Digital MyBook AV
manual 7 pagini
Western Digital WDBACW0020HBK
manual 78 pagini
Western Digital My Book
manual 146 pagini
Western Digital My Passport Ultra
manual 92 pagini
Western Digital 1TB Elements USB 3.0
manual 2 pagini
Western Digital My Book Essential
manual 85 pagini
Oyen Digital U32-54-1000-M
manual 1 pagină
Western Digital My Passport Wireless Pro
manual 72 pagini
Vedeți toate Oyen Digital manualele
Vedeți toate Oyen Digital Hard-disk manualele